|
It's easy to transform a kitchen from worn and tired, to vibrant and fresh. This kitchen required some modifications, but the cabinets were put aside for later use. The old varnish was removed and the shells and doors painted with a fresh coat or white gloss.
You can make the job an easy one (well, at least not a gruelling one!) by following these step:
1. Remove all the hardware from the doors and drawers (yep, ALL the handles, pulls and hinges).
2. If the drawer fronts can be removed, do so. Pull out the drawers and set aside.
3. Clean all surfaces with Sugar Soap and a sponge or an abrasive pad. (Pssst: don’t worry. Everyone’s kitchen doors get that dirty!).
Wipe all the surfaces dry.
4. Look for dents or scratches. Repair them with spackling compound applied with a putty knife.
Let the spackling dry thoroughly.
5. Check any new hardware to see if they fit the existing holes. If not, fill in the old holes with spackling compound. (or return the new hardware to the store and get some that will fit!)
6. Sand the surfaces to be painted will coarse sandpaper so the paint will adhere more completely. Wrap the paper around a sanding block for ease of use.
Make certain you sand all the nooks and crannies and rounded edges. (Yes, all of them!)
7. Paint the backs of the doors and drawer fronts first. Let dry and then paint the front faces. You can paint the doors with a standard-sized paint roller. Paint the edges with a brush.
8. Use one of those little paint rollers or a small paintbrush to paint the face frames.
Let everything dry completely before you begin to reassemble.
9. Screw the hinges to the doors and then back to the face frames.
Re-attach all the handles and the pulls or add the new ones (don’t give up - you are on the home stretch!).
Apply rubber or felt bumpers on the backs of the doors to prevent the paint from sticking.
Hurrah! A new kitchen - fresh and clean! Now what do you think we can do in that upstairs bath?
Colourwash finish for kitchen cabinets
[pics]
1. Prepare the surface by cleaning and sanding to remove any previous varnish or paint. Wipe clean to remove all traces of dust.
2. Mix one part acrylic paint to four parts water. Apply to wood surface, brushing in direction of grain, a small area at a time. Allow to dry.
3. Wipe surface with clean, lint-free cloth to partially remove paint until the desired effect is achieved.
4. Apply two coats of clear acrylic sealer or finish, sanding lightly between coats.
|
